Kincrome 234 piece 3 drawer AF and Metric toolchest contents:

9 Drawer Kincrome Tool Chest:
- measurements: 660mm x 305mm x 403mm.
- heavy gauge, powder coated Steel.

METRIC SIZES:

Ring and open end spanners: 10, 11, 12, 13, 14, 15, 17, 19, 22mm.
Ring spanners: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm.
Open end spanners: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm.
Flare nut spanners: 10 x 11mm, 12 x 13, 15 x 17mm.
1/4 inch square drive sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12mm.
3/8 inch square drive sockets: 9, 10, 11, 12, 13, 14, 16, 17, 19mm.
3/8 inch square drive deep sockets: 10, 11, 12, 13, 14, 15, 17, 19mm.
1/2 inch square drive sockets: 8, 9, 10, 11, 12, 13, 15, 17, 19, 20, 21, 23, 25, 28, 30, 32mm.

Air impact sockets: 1/2 inch square drive 10, 11, 12, 13, 14, 17, 19, 21, 22, 24mm.

AF SIZES:
Ring and open end spanners: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 inch.
Ring spanners: 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1 inch.
Open end spanners: 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 13/16 x 7/8, 15/16 x 1 inch.
Flare nut spanners: 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16 inch.
1/4 inch square drive sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 inch.
3/8 inch square drive sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 inch.
3/8 inch square drive deep sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 inch.
1/2 inch square drive sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 inch, 1 1/16, 1 1/8, 1 3/16, 1 1/4 inch.
Air Impact Sockets 1/2 inch Square Drive: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 inch.

Socket Accessories:
- 1/4 inch square drive 150mm (6 inch) spinner handle.
- 1/4 inch male x 3/8 inch female adaptor.
- 3/8 inch square drive ratchet handle reversible.
- 1/2 inch square drive ratchet handle reversible.
- 75mm (3 inch) male extension.
- 150mm (6 inch) extension.
- 125mm (5 inch) extension bar.
- 250mm (10 inch) extension bar.
- 500mm (20 inch) extension bar.
- 250mm (10 inch) sliding T-handle.
- 425mm (17 inch) speed brace.
- 375mm (15 inch) flex handle.
- male universal joint.

SPARK PLUG SOCKETS:
- 16mm (5/8 inch) x 3/8 inch square drive.
- 21mm (13/16 inch) x 1/2 inch square drive.

ADJUSTABLE WRENCHES:
- 150mm (6 inch) adjustable wrenches.
- 200mm (8 inch) adjustable wrenches.
- 300mm (12 inch) adjustable wrenches.

PLIERS:
- 200mm (8 inch) combination pliers
- 200mm (8 inch) long nose pliers
- 175mm (7 inch) diagonal cutting pliers
- 250mm (10 inch) Multi-grip pliers
- 250mm (10 inch) lock grip pliers.

SCREWDRIVERS + WALL STORAGE RACK:
- Blade: 38mm x 6mm, 75mm x 3.2mm, 100mm x 5mm, 150mm x 6mm, 200mm x 9.5mm.
- Electricians Insulated Screwdriver 150 x 5mm.
- Phillips Head: No. 0 x 75mm, No. 1 x 75mm, No. 2 x 38mm, No. 2 x 100mm, No. 3 x 150mm.

PUNCH AND CHISEL SET IN WALLET:
- Cold Chisels:
-- 200 x 19 x 23mm (8 x 3/4 x 7/8 inch).
-- 190 x 16 x 19mm (7 1/2 x 5/8 x 3/4 inch).
-- 175 x 12.5 x 16mm (7 x 1/2 x 5/8 inch).
-- 150 x 9.5 x 13mm (6 x 3/8 x 1/2 inch).

- Taper Punches:
-- 150 x 12.5 x 6mm (6 x 1/2 x 1/4 inch).
-- 150 x 12.5 x 4.5mm (6 x 1/2 x 3/16 inch).

- Pin Punches:
-- 150 x 12.5 x 6mm (6 x 1/2 x 1/4 inch).
-- 150 x 9.5 x 4mm (6 x 3/8 x 5/32 inch).

25 piece AF/MET hex key set in wallet:
- 1/16 inch - 3/8 inch long arm.
- 1.5mm - 10mm short arm.

Long taper punch: 250 x 16 x 5mm (10 x 5/8 x 13/16 inch).
Centre punch: 150 x 9.5mm (6 x 3/8 inch).
Cape chisel: 150 x 9.5 x 4mm (6 x 3/8 x 5/32 inch).
Dia point chisel: 150 x 12.5mm (6 x 1/2 inch).

8 piece pin punch set in wallet: 1.6, 2.3, 3.2, 4, 4.8, 5.5, 6.4, 8mm.

Feeler Gauge 32 Blade 12.7mm x 88.7mm with brass blade for electronic ignition.

5 piece circlip plier sets.
450gm (16oz) engineers hammer ball pein.
Heavy duty hacksaw.
Blow mould tray.