Kincrome 133 piece 3 drawer AF and Metric toolchest contents:

Toolchest 3 Drawer:
- Measurements: 470mm x 230mm x 310mm.
- MADE IN AUSTRALIA Heavy Gauge Steel, Powder Coated.

METRIC SIZES:
5 x ring spanners: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17mm.
5 x open end spanners: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17mm.
7 x 1/4 inch square drive sockets: 4, 5, 6, 7, 8, 9, 10mm.
1/2 inch square drive sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27mm.

AF SIZES:
5 x ring spanners 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4 inch.
5 x open end spanners 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8 inch.
7 x 1/4 inch square drive sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8 inch.
13 x 1/2 inch square drive sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 inch, 1 1/6 inch, 1 1/8 inch.

25 piece AF/Metric hex key set in wallet.

25 piece Long and Short Arm:
- 1/16 inch - 3/8 inch long arm.
- 1.5mm - 10mm short arm.

9 Socket Accessories:
- 1/4 inch square drive reversible ratchet.
- 1/2 inch square drive reversible ratchet.
- 50mm (2 inch) male extension.
- 75mm (3 inch) male extension.
- 125mm ( 5 inch) extension.
- 150mm ( 6 inch) extension.
- 250mm (10 inch) extension.
- 250mm (10 inch) sliding T-handle.
- universal joint.

2 Spark Plug Sockets:
- 16mm (5/8 inch) x 1/2 inch square drive.
- 21mm (13/16 inch) x 1/2 inch square drive.

4 Pair Pliers:
- 175mm ( 7 inch) combination pliers.
- 150mm ( 6 inch) long nose pliers.
- 250mm (10 inch) multi grip pliers.
- 250mm (10 inch) lock grip pliers.

Torquemaster Mechanics/Engineers Screwdrivers:
- 4 Blade screwdrivers: 38mm x 6mm 75mm x 3.2mm 150mm x 6mm 200mm x 9.5mm.
- 2 Phillips screwdrivers: Type No. 1 x 75mm No. 2 x 100mm.

7 piece Punch and Chisel Set in Wallet
- 3 x cold chisels: 150mm x 12.5mm x 16mm (6 inch x 1/2 inch x 5/8 inch) 150mm x 9.5mm
- 2 x 13mm (6 inch x 3/8 inch x 1/2 inch) 150mm x 9.5mm x 10mm (6 inch x 3/8 inch x 3/8 inch).
- 2 taper punches: 150mm x 9.5mm x 4.5mm (6 inch x 3/8 inch x 3/16 inch) 150mm x 9.5mm x 3mm (6 inch x 3/8 inch x 1/8 inch).
- pin punch 150mm x 9.5mm x 4.5mm (6 inch x 3/8 inch x 3/16 inch).
- centre punch 150mm x 9.5mm (6 inch x 3/8 inch).

250mm (10 inch) adjustable wrench.
Engineers hammer ball pein 450gm. (16oz.)
Heavy duty hacksaw.
Blow mould tray.
PVC tray part.